|
| |
| |
|
 |
|
Remove
termination without damaging the
mounting hole. The ET-X50-EXT
tools are designed to remove and
install the X Probe Terminations
from the Back plate with the Probe
and Spacer plates in place. These
tools would typically be used
for field repairs where it is
not practical to remove all of
the probes and disassemble the
Probe and Spacer plates from the
fixture |
| |
|
|
| |
|
 |
|
Pre-set
to your required heights are available
for each series. |
| |
|
|
| |
|
 |
|
Allow
for simple Go/No-Go inspection
of probe and termination mounting
holes. |
| |
|
|
| |
|
 |
|
Ease
probe installation while preventing
tip blunting. |
|
| |
| |
All
specifications subject to change without
notice. All dimensions are in inches
[mm].
All spring forces in ounces [gms]. |
|
|
|
| |
|
