Order
the IT125-FLUSH or IT125 SET
.XXX. Specify range = .000/.250
[0.00/6.35] to install 125-25 sockets
Extraction
Order
the ET125-KIT for
removing a damaged socket from its
mounting hole. The kit consists of
one ET125 socket
extraction tool, one IT125-FLUSH
(socket must be flush before extraction).
Pin
Gauge
Mounting
holes in G10 material should be gauged
at .094/.096 [2.39/2.44] in diameter
using the PG125 pin
gauge.
Installation
Order
the PT100/75 to install
125-25 series probes.s
All
specifications subject to change without
notice. All dimensions are in inches
[mm].
All spring forces in ounces [gms].
