Use the ST25 socket
threading tool to ease installation of 025-16
series sockets in multi-plate fixtures.
Installation
Order
the IT39 - FLUSH or IT39
SET.XXX to install 039-16 series
sockets. Specify range = .000/.320
[0.00/8.13].
Extraction
Order
the ET39-KIT for removing a
damaged socket from its mounting hole.
The kit consists of one ET39
socket extraction tool, one IT39-FLUSH
(sockets must be flush before extraction).
Pin
Gauge
Mounting
holes in G10 material should be gauged
at .0307/.0317 [.78/.81] diameter
using PG39 pin gauge.
Installation
Order the PT50/39
to install 039-16 series probes.
All
specifications subject to change without
notice. All dimensions are in inches
[mm].
All spring forces in ounces [gms].
